실제 엔지니어링 사례를 통해 ImpedanceCalculator를 사용하여 전문적인 임피던스 계산을 수행하는 방법을 배우세요. 기본 회로에서 복잡한 PCB 설계까지 실용적인 계산 기술을 마스터하세요.
계산 시작실제 USB, PCIe, DDR, 이더넷 및 HDMI 설계 가이드
USB 2.0에서 USB4까지 완전한 PCB 설계 가이드. 차동 페어 라우팅, 임피던스 요구사항(90Ω), Type-C 커넥터 설계 및 신호 무결성을 배우세요.
PCIe Gen3, Gen4, Gen5 인터페이스를 설계하세요. 차동 라우팅(85Ω), 비아 최적화, 재료 선택 및 고속 PCIe의 신호 무결성을 배우세요.
DDR4 및 DDR5 메모리 인터페이스 설계를 마스터하세요. 플라이바이 토폴로지, 타이밍 제약, 임피던스 요구사항(40Ω) 및 레이아웃 기술을 배우세요.
안정적인 1G, 10G, 25G 이더넷 인터페이스를 설계하세요. PHY 레이아웃, 마그네틱 배치 및 고속 네트워킹을 위한 차동 페어 라우팅(100Ω)을 배우세요.
HDMI 1.4, 2.0, 2.1 인터페이스 설계를 마스터하세요. TMDS/FRL 라우팅(100Ω), 커넥터 레이아웃 및 4K/8K 비디오 애플리케이션의 신호 무결성을 배우세요.
각 예제에는 상세한 매개변수 설정, 계산 결과 및 엔지니어링 설명이 포함됩니다
특정 주파수에서 저항, 인덕터 및 커패시터를 포함하는 직렬 회로의 임피던스 계산
At 1kHz frequency, the inductive reactance is approximately 62.8Ω, and capacitive reactance is approximately 159.2Ω. Since capacitive reactance is greater than inductive reactance, the circuit exhibits capacitive characteristics.
Design PCB trace width calculation for 50Ω characteristic impedance
For standard FR4 substrate, to achieve 50Ω characteristic impedance, the trace width needs to be approximately 2.7mm. This is the standard impedance value for high-frequency signal transmission.
Analyze capacitor impedance variation across different frequencies
Capacitor impedance is inversely proportional to frequency. When frequency increases by 10 times, impedance decreases by 10 times. This is the fundamental working principle of capacitors in filter circuits.
Calculate resonant frequency and impedance characteristics of LC parallel circuit
At resonant frequency, LC parallel circuit exhibits maximum impedance. Higher Q factor results in better selectivity and narrower bandwidth.
이 예제를 최대한 활용하여 엔지니어링 계산 기술을 향상시키세요
Deeply understand the physical principles and mathematical formulas behind each calculation
Use calculators to reproduce example results, try different parameter combinations
Apply learned knowledge to your actual engineering projects